Colourful Decorative Rustproof 42mm Curtain Rod Rings

Product Description

Colourful Decorative Rustproof 42mm Curtain Rod Rings

[SKU INFORMATION]

Packaging Details:

Selling Units:Single item

supply Ability:200000 piece/pieces per week

Single package size:6.5X6.5X1 cm

Single gross weight:0.010 kg

Package Type:

200pcs/bag; 500pcs/bag;

1000ps/bag; 2000pcs/bag;

5000pcs/bag;
we can also packing according to clients' demand

The curtain rod is used to fix the curtain when installing the curtain. The curtain is also a kind of room decoration. Among them, the curtain ring is also a more important type. Maybe many people don't care about it. So what is the installation method of the curtain ring? What are the precautions for curtain installation? The following Jiuzheng Home Furnishing website will explain it for everyone, let's take a look.

Installation method of curtain ring:

1. Install the top seat. First determine the installation position of the curtain ring buckle, and then use an electric drill to drill the hole. After drilling the hole, use the expansion screw to fix the four top seats (if the rod length is greater than the conventional size, the length can be adjusted accordingly).

2. Install the curtain ring buckle corner. The corner of the curtain buckle is installed on the top of the wall or balcony, and the corner is 50 to 70 cm away from the movable top seat. A 45-degree triangle must be formed in the middle of the movable top seat, and the position where the hand is installed is to maintain the same vertical line.

3. Steel wire connection. There are two steel wires in a set of curtain buckles. Take out one first. First, pass one end of the steel wire through the steel wire groove of the corner bearing, then through the movable wheel wire groove of the movable end top seat, and then through the fixed end top seat. The steel wire groove makes the steel wire perpendicular to the ground, and then the top cover is inserted from the steel wire to clamp the top seat cover. The same goes for the other end of the wire. The second wire is installed in the same way as the first wire.

4. The curtain rod connection. At the end of each wire, put on a drop ball and pay attention to knotting in the drop ball; then pull the drop ball until it withstands the top seat. At this time, pull the wire from the corner position to form a double-stranded wire. It is stuck on the side of the hand crank; loosen the steel wire in the hand crank, drop the drop ball, pass the curtain rod through the drop ball, and then tighten and fasten the screw at the hole position of the drop ball; finally in the curtain rod Install plugs at both ends. In this way, the curtain buckle installation is completed.