Rust Resistant Anti Static Iron 55mm Curtain Rod Rings

Product Description

Rust Resistant Anti Static Iron 55mm Curtain Rod Rings

[SKU INFORMATION]

Packaging Details:

Selling Units:Single item

Single package size:20X15X5 cm

Single gross weight:1.000 kg

Package Type:

  Both full package or sepatated package are available;

  we can also packing according to clients' demand.

How to install the curtain ring
1. First, punch holes in the wall with an electric impact drill, and use the installed support as the standard marking to draw the support positioning line and the hole position line. Generally, the length of the Roman pole is more than 2.5 meters with 3 supports, the middle support is located in the center of the window or wall, and the two ends must be equidistant. The supports at both ends are about 15-20cm away from the wall.

2. The punching depth is 3.5-5cm. When punching, you can't run away or skew. Note: Keep away from wires and water pipes. After drilling the hole, press the plastic expansion tube into the hole.

3. The mounting rod support is fastened by self-tapping screws, the lifting ring is inserted into the rod, the lifting ring is divided into two, and one lifting ring is left at each end; press the Roman rod into the open support and adjust to make the ends decorated head The distance from the wall is the same.

4. Hang the curtains. Put on the hooks and hang the other end of the hooks into the holes of the rings; open and close the curtains left and right, check whether the sliding is flexible and whether the two curtains are of equal height. When the height is inconsistent, make fine adjustments in time.